-
FIS Fiber Optic Patch Cable, SC PC to ST PC, 5 meters, 1.6mm Simplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: Y8Y8M5FISC Unit of Measurement : EA$5.05 Qty Buy as low as $4.55 -
FIS Fiber Optic Patch Cable, LC PC to LC PC, 3 meters, 1.6mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: Y2LLM3FISC Unit of Measurement : EA$4.60 Qty Buy as low as $4.14 -
FIS 12 Fiber MPO Breakout Cassette, Singlemode, MTP/PC Female SC/UPC, Type A SKU: F1MTPFSCOS112 Unit of Measurement : EA$190.00 -
FIS Stock Fiber Optic Patch Cable, MCC SC-ST 62.5/125um, 3 Meters SKU: F1MCP32SCST Unit of Measurement : EA$70.00 -
![FIS SC/APC SM 9/125um Terminator Connector]()
FIS SC/APC SM 9/125um Terminator Connector, Back Reflection -65dB SKU: F13072 Unit of Measurement : EA$7.95 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 6 Fiber, Singlemode, LC/UPC, Blue Boots, 3 Meters SKU: SP6LCUPCBU Unit of Measurement : EA$14.75 -
![Planar Lightwave Circuit Splitter 1x4 PLC with SC/APC Fan Out]()
Planar Lightwave Circuit Splitter 1x4 PLC with SC/APC Fan Out SKU: F1PLC04SCA Unit of Measurement : EA$48.00 -
![Planar Lightwave Circuit Splitter]()
Planar Lightwave Circuit Splitter, 1x16 PLC with SC/UPC Fan Out SKU: F1PLC16SCU Unit of Measurement : EA$75.00 -
![FIS Universal Test Adapter ST to 2.5mm]()
FIS Universal Test Adapter ST to 2.5mm SKU: F181UNIV Unit of Measurement : EA$25.00 Qty Buy as low as $20.00 -
![FIS Corrugated Innerduct Indoor Plenum Rated Orange 250ft Coil]()
FIS Corrugated Innerduct Indoor Plenum Rated Orange 250ft Coil SKU: F111437P250 Unit of Measurement : Roll$650.00 -
![FIS Fiber Optic Cable Tie Wraps White (100pk)]()
-
![FIS LC Connector Duplex 1.6mm-2.0mm Multimode]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
