-
AFL Strand Mount Hanger Bracket Kit Aerial for Apex X-2S and X-2 Closure SKU: AXKITAERIAL1 Unit of Measurement : EA$45.95 -
AFL Apex X-2S Closure Wall/Pole Mount Hanger Bracket Kit SKU: AXBR30 Unit of Measurement : EA$101.95 -
AFL Splice Closure Apex™ X-2 Sealed with Slack Basket, Strain Relief Kits and Ground Lugs SKU: AX2BX022X Unit of Measurement : EA$292.50 -
AFL Splice Tray Apex™ X-2 with (2) Splice Modules (36 Single Splices or 144 Ribbon Fiber Splices) SKU: AXTRAY22 Unit of Measurement : EA$17.50 -
![AFL Splice Tray Apex™ X-2 with (4) Splice Modules (36 Single Splices or 144 Ribbon Fiber Splices)]()
AFL Splice Tray Apex™ X-2 with (4) Splice Modules (36 Single Splices or 144 Ribbon Fiber Splices) SKU: AXTRAY24 Unit of Measurement : EA$21.15 -
![Corning® Splice Tray 24 Single Fiber Heat Shrinks for SCF Series Enclosures]()
Corning® Splice Tray 24 Single Fiber Heat Shrinks for SCF Series Enclosures, 0.2" Deep SKU: SCFST112 Unit of Measurement : EA$31.70 -
![Corning® Pole/Wall Mounting Bracket for SCF 4" Closures]()
Corning® Pole/Wall Mounting Bracket for SCF 4" Closures SKU: SCFPOLEBKT4 Unit of Measurement : EA$110.00 -
![FIS VIS300 Video Inspection Probe]()
-
![Corning® Pole/Wall Mounting Bracket for SCF 6" Closures]()
Corning® Pole/Wall Mounting Bracket for SCF 6" Closures SKU: SCFPOLEBKT6 Unit of Measurement : EA$115.00 -
![Corning® Aerial Hanging Brackets for 4", 6" & 8" Canister and In-Line Closures]()
Corning® Aerial Hanging Brackets for 4", 6" & 8" Canister and In-Line Closures SKU: BKTSCC Unit of Measurement : EA$70.00 -
![Zeus 2F Flat Drop SM ZTAP Conn-Pigtail 1500' - 24" spool]()
Zeus 2F Flat Drop SM ZTAP Conn-Pigtail 1500' - 24" spool SKU: ZDCN-1-HIP-P-1500-SP Unit of Measurement : EA$279.75 -
![Zeus 2F Flat Drop SM ZTAP Conn-Pigtail 2000' - 24" spool]()
Zeus 2F Flat Drop SM ZTAP Conn-Pigtail 2000' - 24" spool SKU: ZDCN-1-HIP-P-2000-SP Unit of Measurement : EA$403.76
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
