-
FIS Isopropyl Alcohol 99% Automatic Dispensing Bottle Plastic SKU: F1007PL Unit of Measurement : EA$6.95 -
FIS Epoxy Room Cure 4 Grams - 50 Pack SKU: T120023C450 Unit of Measurement : 50PK$415.00 Qty Buy as low as $394.25 -
-
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808M Unit of Measurement : EA$11.95 -
![FIS Copper Cat 5e Patch Cable with Boots 3ft Blue]()
-
![FIS Media Switch SC Multimode (1) Fiber Port & (7) 10/100 Twisted Pair Ports 8-Port]()
FIS Media Switch SC Multimode (1) Fiber Port & (7) 10/100 Twisted Pair Ports 8-Port SKU: F1JC08AMS Unit of Measurement : EA$105.95 -
![FIS Patch Panel 1RU Holds (3) Adapter Plates Solid Door Unloaded Off White]()
FIS Patch Panel 1RU Holds (3) Adapter Plates Solid Door Unloaded Off White SKU: F1RM1RU3XBW Unit of Measurement : EA$160.00 Qty Buy as low as $144.00 -
![FIS Mandrel 4mm for Bend-Insensitive Multimode Fiber for 1.6/2mm Cable]()
FIS Mandrel 4mm for Bend-Insensitive Multimode Fiber for 1.6/2mm Cable SKU: F1CCM04 Unit of Measurement : EA$40.95 Qty Buy as low as $32.76 -
![FIS Media Converter SC Multimode 10/100/1000 Base-T/TX to 1000 Base-FX 2km]()
FIS Media Converter SC Multimode 10/100/1000 Base-T/TX to 1000 Base-FX 2km SKU: F1DU1000132SC Unit of Measurement : EA$121.35 -
![SC to LC APC-UPC]()
FIS Fiber Optic Patch Cable, SC to LC APC-UPC, 1 meter, 1.6mm, Simplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: Y9YALUS1FISCU Unit of Measurement : EA$4.25 -
![FIS 24 Fiber MPO Breakout Cassette]()
FIS 24 Fiber MPO Breakout Cassette, MM 50um OM3, MTP/PC Male LC/UP-Type A SKU: F1MTPMLCOM324 Unit of Measurement : EA$270.00 -
![FIS FIBER FENCE Splicing Kit]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
