-
FIS Flat Drop Cable, 2 Fiber, Singlemode, H-IP-pigtail, 24" Spool, 122 meters (400 feet) | Plus Corning® SMF-28® Ultra Fiber SKU: ZDCT-1-HIP-P-400-SP Unit of Measurement : EA$87.85 -
Corning® Silicon Lubricant for SCF Dome Seat (10-Pack) SKU: UCNKTLB Unit of Measurement : EA$110.00 -
Zeus 2F Flat Drop SM Toneable ZTAP Connector-Pigtail 1,500FT SKU: ZDCT-1-HIP-P-1500 Unit of Measurement : EA$289.76 -
Zeus 2F Flat Drop SM Toneable ZTAP Connector-Pigtail 2,000 FT SKU: ZDCT-1-HIP-P-2000 Unit of Measurement : EA$378.41 -
![FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 300 ft 24" spl]()
FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 300 ft 24" spl SKU: ZDCT-1-HIP-P-300-SP Unit of Measurement : EA$73.30 -
![FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 500 ft 24" spl]()
FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 500 ft 24" spl SKU: ZDCT-1-HIP-P-500-SP Unit of Measurement : EA$102.45 -
![FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 1000 ft 24" sp]()
FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 1000 ft 24" sp SKU: ZDCT-1-HIP-P-1000-SP Unit of Measurement : EA$184.45 -
![FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 1500 ft 24" sp]()
FIS SST Flat Tone Drop H-IP Tap Conn.-Pigtail 1500 ft 24" sp SKU: ZDCT-1-HIP-P-1500-SP Unit of Measurement : EA$257.45 -
![AFL Fusion Splicer DC Power Cord DCC-20]()
-
![AFL Fiber Cable Storage Unit 12" with Horizontal Bracket]()
AFL Fiber Cable Storage Unit 12" with Horizontal Bracket SKU: FA000004 Unit of Measurement : EA$45.00 -
![AFL Cable Grommet 3-Port for Standard Size Drops]()
-
![FIS LC Attenuator Male to Female Multimode UPC Attenuator 3dB]()
FIS LC Attenuator Male to Female Multimode UPC Attenuator 3dB SKU: F18761A03MM50 Unit of Measurement : EA$28.35 Qty Buy as low as $25.52
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
