-
FIS 24 Fiber MPO Breakout Cassette, MM 50um OM3, MTP/PC Female LC/UPC, Type A SKU: F1MTPFLCOM324 Unit of Measurement : EA$270.00 -
FIS Mode Conditioning Fiber Optic Patch Cable, 62.5/125um MM OM1 Fiber, LC/PC ST/PC, 3 meters SKU: F1MCP32LCST Unit of Measurement : EA$70.00 -
FIS LC/APC SM 9/125um Terminator Connector, Back Reflection -65dB SKU: F14072 Unit of Measurement : EA$7.95 -
FIS 900um Pigtail, 6 Fiber, Multimode 50 um OM3, LC/PC, Aqua Boots, 3 Meters SKU: SP6LCMM50GAQ Unit of Measurement : EA$13.25 -
![FIS Distribution Pigtail]()
FIS Distribution Pigtail, 12 Fiber, Multimode, 50um OM3, LC/UPC, Aqua Boots, 3 Meters SKU: DSP12LCMM50GAQ Unit of Measurement : EA$34.00 -
![Planar Lightwave Circuit Splitter 1x16 PLC with SC/APC Fan Out]()
Planar Lightwave Circuit Splitter 1x16 PLC with SC/APC Fan Out SKU: F1PLC16SCA Unit of Measurement : EA$60.00 -
![FIS Visual Fault Locator with LC Adapter Singlemode / Multimode]()
FIS Visual Fault Locator with LC Adapter Singlemode / Multimode SKU: OF1000ULC Unit of Measurement : EA$350.00 Qty Buy as low as $315.00 -
![FIS MM Mandrel Kit-50um and 62.5um]()
-
![FIS Fusion Splicer Electrodes for the original FIS Cougar]()
Spare Electrodes for the original FIS Cougar Fusion Splicer SKU: F1COUGARTRODE Unit of Measurement : Pair$84.25 -
![FIS Cable Management Tie Wrap Foam Padding 1"(W) x 12"(L) Orange (50-Pack)]()
FIS Cable Management Tie Wrap Foam Padding 1"(W) x 12"(L) Orange (50-Pack) SKU: FOTWOR50 Unit of Measurement : Pkg$75.95 -
![FIS Fiber Optic Cable Marking Cable Clip Warning Labels with Reflective Laminated Label Applied 6" Long Black on Yellow (generic print)]()
FIS Fiber Optic Cable Marking Cable Clip Warning Labels with Reflective Laminated Label Applied 6" Long Black on Yellow (generic print) SKU: F1CC Unit of Measurement : EA$12.95 -
![FIS Cable Tie Mounting Base Black (10-Pack)]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
