-
Viavi OTDR Module 1310/1550/1625nm METRO-ACCESS/PON with APC Adapter SKU: E4136MA3APC Unit of Measurement : EA$9,754.00 -
Viavi OTDR Module CWDM 1271 to 1451nm (Lower Wavelengths) 10 Wavelength SKU: E41CWDM10LAPC Unit of Measurement : EA$11,459.00 -
-
TLC Indoor/Outdoor Cable, 96 Fiber, Multimode 50/125um, OM4, Gel Free, Plenum, Black | Plus Corning® ClearCurve® OM4 Multimode Fiber SKU: M50DL96C4NPBL25 Unit of Measurement : EA$30.00 -
![TLC Indoor/Outdoor Cable, 144 Fiber, Multimode 50/125um, OM4, Gel Free, Plenum, Black | Plus Corning® ClearCurve® OM4 Multimode Fiber]()
TLC Indoor/Outdoor Cable, 144 Fiber, Multimode 50/125um, OM4, Gel Free, Plenum, Black | Plus Corning® ClearCurve® OM4 Multimode Fiber SKU: M50DL144C4NPBL25 Unit of Measurement : EA$39.95 -
![AFL Fusion Splicer Cable Clamp CLAMP-FC-2000 (Pair)]()
-
![FIS FIBER FENCE Double Headed Zip Ties]()
-
![FIS FIBER FENCE Original Splice Kit]()
-
![Signamax Media Switch 4 Ports 10/100 Base T/TX (RJ45) PoE+ & 6 Ports 10/100 Base T/TX (RJ45) Unmanaged Industrial Switch]()
Signamax Media Switch 4 Ports 10/100 Base T/TX (RJ45) PoE+ & 6 Ports 10/100 Base T/TX (RJ45) Unmanaged Industrial Switch SKU: SI10050 Unit of Measurement : EA$151.25 -
![Signamax Media Switch 8 Port 10/100/1000 Base T/TX (RJ45) 8 100/1000 SFP Downstream Ports & 4 1000/GbE Uplink SFP Ports Industrial Managed Switch]()
Signamax Media Switch 8 Port 10/100/1000 Base T/TX (RJ45) 8 100/1000 SFP Downstream Ports & 4 1000/GbE Uplink SFP Ports Industrial Managed Switch SKU: SI30010 Unit of Measurement : EA$1,708.55 -
![FIS FC Connector Singlemode 900um White Boot, 100pk]()
FIS FC Connector Singlemode 900um White Boot, 100pk SKU: F12070900100 Unit of Measurement : EA$430.00 -
![FIS 12-Position 7" x 4" Aluminum Splice Tray]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
