-
-
Zeus MST Box, 4 Port, with SC/APC - Pigtail, 2500' SKU: Z1-MST-04-YA-P-2500 Unit of Measurement : EA$558.95 -
Fiber MM 50um OM4 MicroDist Plen. Magenta MTP/female to MTP/female 50 meters SKU: XCF36L4C50C Unit of Measurement : EA$250.00 -
AFL Wall Mount Enclosure Holds (4) LGX Adapter Plates Black Unloaded SKU: WME04E Unit of Measurement : EA$146.00 -
![OptiTap Adapter Ceramic Sleeve (OM4/OM3/OM2/OS2) Black]()
OptiTap Adapter Ceramic Sleeve (OM4/OM3/OM2/OS2) Black SKU: KTOPTADPT Unit of Measurement : EA$18.95 -
![FIS Flat Drop Cable, 2 Fiber, Singlemode, Gel Filled, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber]()
FIS Flat Drop Cable, 2 Fiber, Singlemode, Gel Filled, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber SKU: S09FD02CZEBLG Unit of Measurement : EA$0.60 -
![FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber]()
FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber SKU: S09FD02CZEBL Unit of Measurement : EA$0.55 -
![AFL Polimod Adapter Plate & Pigtails 12 Connector SC/APC - 1per box]()
AFL Polimod Adapter Plate & Pigtails 12 Connector SC/APC - 1per box SKU: PML12ASC0S01 Unit of Measurement : EA$215.00 -
![AFL OFI-BIPMe Optical Fiber Identifier]()
-
![PRO-TRACE® 12 AWG High Flex Copper Clad Steel (HF-CCS) PE30 Orange 2500’]()
PRO-TRACE® 12 AWG High Flex Copper Clad Steel (HF-CCS) PE30 Orange 2500’ SKU: 744120647 Unit of Measurement : EA$307.25 -
![3M-EMSD Diamond Lapping Film 3x6 3um (25pk)]()
-
![TLC Duplex Cable, 3mm, Multimode, 50/125um, Riser, Orange | Plus Corning® ClearCurve® OM2 Multimode Fiber]()
TLC Duplex Cable, 3mm, Multimode, 50/125um, Riser, Orange | Plus Corning® ClearCurve® OM2 Multimode Fiber SKU: M50DX02CGNRO Unit of Measurement : EA$0.58
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
