-
FIS 1.25 APC Universal Tip for Handheld Fiber Inspection Probe F17500VIS SKU: F17500UA125 Unit of Measurement : EA$77.25 -
FIS Patch & Splice Cassette Kit, Singlemode, LC/UPC, 24 Fiber SKU: F1PSCKLCUPC24 Unit of Measurement : EA$260.00 -
FIS Atlas Mini Singlemode OTDR w/ 1650nm Filtered (LIVE) only, 26/24dB, SC/APC Connector SKU: FC1650A26D Unit of Measurement : EA$1,895.00 -
-
![FIS QSFP28]()
FIS QSFP28, Active OM-3 Optical Cable to QSFP28, SR4 100G, 10m, SKU: QSFP28100GAOC10MIO Unit of Measurement : EA$364.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC PC to SC PC, 3 meters, 1.6mm Simplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: Y8LYM3FISC Unit of Measurement : EA$4.60 Qty Buy as low as $4.14 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, ST PC to LC PC, 2 meters, 1.6mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: Y28LM2FISC Unit of Measurement : EA$4.10 Qty Buy as low as $3.69 -
![FIS Mode Conditioning Patch Cable SC-SC 62.5/125um]()
FIS Mode Conditioning Patch Cable SC-SC 62.5/125um, 1 Meter SKU: F1MCP12SCSC Unit of Measurement : EA$68.00 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Multimode 50um OM2, LC/PC, Black Boots, 3 Meters SKU: SP12LCMM50BLK Unit of Measurement : EA$26.50 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 6 Fiber, Multimode 50um OM2, ST/PC, Black Boots, 3 Meters SKU: SP6STMM50BLK Unit of Measurement : EA$12.00 -
![FIS Fusion Protection Sleeve ULTRAsleeve 60mm]()
-
![FIS Break-Out Kit 12 Fiber 3mm Aqua (numbered instead of color coded) 40" Tubing Length Accepts 900um]()
FIS Break-Out Kit 12 Fiber 3mm Aqua (numbered instead of color coded) 40" Tubing Length Accepts 900um SKU: F1BOK1240MA Unit of Measurement : EA$28.50 Qty Buy as low as $25.65
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
