-
FIS Atlas Mini-OTDR Singlemode with Video Inspection Probe Kit (APC & UPC tips included) SKU: FC1315VMP Unit of Measurement : EA$1,995.00 -
FIS Patch & Splice Cassette Kit, Singlemode, LC/UPC, 12 Fiber, Ribbon SKU: F1PSCKLCUPC12R Unit of Measurement : EA$145.00 -
FIS QSFP28, Active OM-3 Optical Cable to QSFP28, SR4 100G, 5m, M SKU: QSFP28100GAOC5MIO Unit of Measurement : EA$356.00 -
FIS Fiber Optic Patch Cable, LC PC to SC PC, 2 meters, 1.6mm Simplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: Y8LYM2FISC Unit of Measurement : EA$4.10 Qty Buy as low as $3.69 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, ST PC to LC PC, 1 meter, 1.6mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: Y28LM1FISC Unit of Measurement : EA$3.85 Qty Buy as low as $3.47 -
![FIS Mode Conditioning Fiber Optic Patch Cable]()
FIS Mode Conditioning Fiber Optic Patch Cable, 62.5/125um MM OM1 Fiber, LC/PC ST/PC, 1 meter SKU: F1MCP12LCST Unit of Measurement : EA$68.00 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Multimode 50um OM3, LC/PC, Aqua Boots, 3 Meters SKU: SP12LCMM50GAQ Unit of Measurement : EA$26.75 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 12 Fiber, Singlemode, SC/UPC, Blue Boots, 3 Meters SKU: SP12SCUPCBU Unit of Measurement : EA$26.50 -
![FIS Crimp Tool Die Armordillo]()
-
![FIS Fusion Protection Sleve]()
-
![FIS Break-Out Kit 12 Fiber 3mm Color Coded 40" Tubing Length Accepts 250um]()
FIS Break-Out Kit 12 Fiber 3mm Color Coded 40" Tubing Length Accepts 250um SKU: F1BOK1240M250 Unit of Measurement : EA$31.50 -
![FIS Cable Management Tie Wrap Foam Padding 1"(W) x 12"(L) Blue (6-Pack)]()
FIS Cable Management Tie Wrap Foam Padding 1"(W) x 12"(L) Blue (6-Pack) SKU: FOTWBL6 Unit of Measurement : 6pack$9.25
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
