-
Anritsu Cable & Antenna Analyzer Site Master 2MHz to 6 GHz SKU: S361E Unit of Measurement : EA$11,885.00 -
Anritsu Wheeled Hard-Side Protective Case for Anritsu PIM Master SKU: 760259R Unit of Measurement : EA$1,140.00 -
Anritsu Antenna, 2400 to 2500MHz/5000 to 6000 MHz, SMA Male, 50 OHM, for Anritsu Wireless Equipment SKU: 20001361 Unit of Measurement : EA$19.50 -
-
![Anritsu Hard Transit Case for MT9083A/B/C]()
-
![Anritsu Soft Carry Case for the MT9083A/B/C]()
-
![EXFO Handheld Display with Digital Inspection Probe Automated Pass/Fail Analysis Software Auto Center APC or UPC Connector & Adapter Tips]()
EXFO Handheld Display with Digital Inspection Probe Automated Pass/Fail Analysis Software Auto Center APC or UPC Connector & Adapter Tips SKU: TKMAXFIP420B Unit of Measurement : EA$3,210.00 -
![EXFO Handheld Display with Digital Inspection Probe]()
EXFO Handheld Display with Digital Inspection Probe, Manual Center/Focus, APC or UPC Connector & Adapter Tips SKU: TKMAXFIP410B Unit of Measurement : EA$2,485.00 -
![FIS USB Flash Drive Firecat Certification Software]()
-
![FIS USB Data Transfer Cable Firecat]()
-
![FIS Power Adapter Firecat 220v AC/12v DC]()
-
![FIS Power Adapter Firecat 110VAC/12VDC]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
