-
Anritsu MS2720T SMA Option 709 Frequency Range 9 kHz-9 GHz SKU: MS2720T0709 Unit of Measurement : EA$22,280.00 -
FIS 98 Channel (14-62.5), DWDM Optical Channel Analyzer (OCA) SKU: OSR80C Unit of Measurement : EA$6,078.00Out of stock -
FIS 200X Benchtop Video Microscope with detached 8 inch Monitor SKU: F1VM200D Unit of Measurement : EA$695.00 -
FIS Easy Tester Multimode Light Source 850/1300nm w/ VFL SKU: EZLS8513 Unit of Measurement : EA$495.00 -
![FIS OTDR SM/MM OV-350 Handheld OTDR (850/1300/1310/1550,SC Adatpers,32/26 dB Dynamic Range,PM/VFL)]()
FIS OTDR SM/MM OV-350 Handheld OTDR (850/1300/1310/1550,SC Adatpers,32/26 dB Dynamic Range,PM/VFL) SKU: OVQUAD Unit of Measurement : EA$3,995.00 -
![Anritsu Cable & Antenna Analyzer Site Master 2MHz to 6 GHz 9kHz to 6GHz Spectrum Analyzer]()
Anritsu Cable & Antenna Analyzer Site Master 2MHz to 6 GHz 9kHz to 6GHz Spectrum Analyzer SKU: S362E Unit of Measurement : EA$22,305.00 -
![FIS Pocket Visual Fault Locator with 1.25mm Adapter for LC & MU Connectors]()
FIS Pocket Visual Fault Locator with 1.25mm Adapter for LC & MU Connectors SKU: F19000125 Unit of Measurement : EA$130.00 Qty Buy as low as $117.00 -
![Divot Bare Fiber Testing Device - SC SM]()
Divot Bare Fiber Testing Device - SC SM, MM 62.5um & 50um SKU: DVTSMB3 Unit of Measurement : EA$395.00 -
![AFL Optical Fiber Identifier Bend Insensitive with Power Meter]()
AFL Optical Fiber Identifier Bend Insensitive with Power Meter SKU: OFIBIPM Unit of Measurement : EA$2,456.00 -
![FIS 98 Channel (14-62.5), DWDM Tunable Laser Source with Video Inspection]()
FIS 98 Channel (14-62.5), DWDM Tunable Laser Source with Video Inspection SKU: OST80C Unit of Measurement : EA$5,420.80Out of stock -
![FIS 400X Benchtop Video Microscope with detached 8 inch Monitor]()
FIS 400X Benchtop Video Microscope with detached 8 inch Monitor SKU: F1VM400D Unit of Measurement : EA$695.00 -
![FIS Easy Tester SM Light Source 1310/1550nm w/ VFL]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
