-
Anritsu Wheeled Hard-Side Protective Case for Anritsu PIM Master SKU: 760259R Unit of Measurement : EA$1,175.00 -
-
Divot Index Matching Gel Replacement Cartridges Bare Fiber Testing Device 3 Pack SKU: DVTRC3 Unit of Measurement : Pkg$70.00 -
FIS Microscope Compact 200x 1.25mm & 2.5mm Adapters SKU: F1MS200U Unit of Measurement : EA$150.00 Qty Buy as low as $120.00 -
![FIS Mini Visual Fault Locator 2.5mm Adapter]()
-
![FIS 18 Channel 1271-1611nm CWDM Analyzer (COSA)]()
-
![Anritsu Fiber Launch Kit, Singlemode, 100 meters, with Armored Leads, SC/APC SC/APC, Includes SC/APC Adapter]()
Anritsu Fiber Launch Kit, Singlemode, 100 meters, with Armored Leads, SC/APC SC/APC, Includes SC/APC Adapter SKU: FMTL5 Unit of Measurement : EA$120.00 -
![FIS Mini OTDR Dual MM 850nm/1300nm 26/24dB with SC/UPC Connector]()
FIS Mini OTDR Dual MM 850nm/1300nm 26/24dB with SC/UPC Connector SKU: FC8513U26D Unit of Measurement : EA$1,895.00 -
![FIS Easy Tester SM/MM Light Source 850/1300/1310/1550nm w/ VFL]()
FIS Easy Tester SM/MM Light Source 850/1300/1310/1550nm w/ VFL SKU: EZLSQUAD Unit of Measurement : EA$895.00 -
![Anritsu Antenna]()
Anritsu Antenna, 2400 to 2500MHz/5000 to 6000 MHz, SMA Male, 50 OHM, for Anritsu Wireless Equipment SKU: 20001361 Unit of Measurement : EA$19.50 -
![Wilcom Optical Fiber Identifier with Core Power Measurement]()
Wilcom Optical Fiber Identifier with Core Power Measurement SKU: F6222 Unit of Measurement : EA$1,600.00 -
![Divot Index Matching Gel Replacement Cartridges Bare Fiber Testing Device 12 Pack]()
Divot Index Matching Gel Replacement Cartridges Bare Fiber Testing Device 12 Pack SKU: DVTRC12 Unit of Measurement : EA$275.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
