-
CommScope Splice Tray 72 Count for "D" Closure (Box of 2) SKU: FOSCACCD72 Unit of Measurement : EA$80.00 -
PLP Splice Tray LITE-GRIP Short 2 Yellow Single Fusion Blocks SKU: LGSTS16 Unit of Measurement : EA$23.85 -
PLP Splice Tray LITE-GRIP Long 5 Yellow Single Fusion Blocks SKU: LGSTS40 Unit of Measurement : EA$31.40 -
PLP Standard Splice Tray for 8006877 and 80061055 36 Count SKU: 80810086 Unit of Measurement : EA$33.10 -
![FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H)]()
FIS Splice Tray 12 Position Fusion Splice (7"L x 4.25"W x .48"H) SKU: F16808 Unit of Measurement : EA$11.95 -
![FIS Splice Tray 12 Position Fusion Splice (6.5"L x 4.68"W x .42"H)]()
FIS Splice Tray 12 Position Fusion Splice (6.5"L x 4.68"W x .42"H) SKU: F1SPL12 Unit of Measurement : EA$17.95 Qty Buy as low as $16.16 -
![FIS Splice Tray 24 Position Fusion Splice (11.72"L x 3.99"W x .41"H)]()
FIS Splice Tray 24 Position Fusion Splice (11.72"L x 3.99"W x .41"H) SKU: F1SPL24 Unit of Measurement : EA$18.95 Qty Buy as low as $17.06 -
![FIS Splice Tray 24 Position Fusion Splice (8.5"L x 5."W x .42H)]()
FIS Splice Tray 24 Position Fusion Splice (8.5"L x 5."W x .42H) SKU: F1SPL24-8.5 Unit of Measurement : EA$18.95 Qty Buy as low as $17.06 -
![FIS Splice Tray 6 Position Fusion Splice (7.5"L x 4.0"W x .63"H)]()
FIS Splice Tray 6 Position Fusion Splice (7.5"L x 4.0"W x .63"H) SKU: F16707BLKH Unit of Measurement : EA$14.95 Qty Buy as low as $13.46 -
![FIS Splice Tray 12 Position Fusion Splice (7.5"L x 4.0"W x .63"H)]()
FIS Splice Tray 12 Position Fusion Splice (7.5"L x 4.0"W x .63"H) SKU: F16707BLKF Unit of Measurement : EA$14.95 Qty Buy as low as $13.46
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
