-
Pathfinder MDU Drop SM LBL SC/APC-SC/APC w/Mini PE 50 ft SKU: ZMDUL-1-YA-YA-MPE-50-HS Unit of Measurement : EA$32.50 -
Zeus 2F SM Flat Drop NonToneable ZTap Conn-Pigtail 3,500 ft SKU: ZDCN-1-HIP-P-3500-SP Unit of Measurement : EA$554.20 -
Zeus MST Box, 4 Port, with SC/APC - Pigtail, 2500' SKU: Z1-MST-04-YA-P-2500 Unit of Measurement : EA$558.95 -
FIS Flat Drop Cable, 2 Fiber, Singlemode, Gel Filled, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber SKU: S09FD02CZEBLG Unit of Measurement : EA$0.60 -
![FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber]()
FIS Flat Drop Cable, 2 Fiber, Singlemode, Dry, Polyethylene, Black | Plus Corning® SMF-28® Ultra Fiber SKU: S09FD02CZEBL Unit of Measurement : EA$0.58 -
![FIS Fiber Drop Cable Enclosure]()
FIS Fiber Drop Cable Enclosure, Includes two Lg hole entry ports SKU: Z1-LOCDROP-EN Unit of Measurement : EA$59.00 -
![FIS Strand Mount Bracket Kit for Fiber Drop Cable Repair Enclosure, 10 Pairs (1 Pair Req'd per housing)]()
FIS Strand Mount Bracket Kit for Fiber Drop Cable Repair Enclosure, 10 Pairs (1 Pair Req'd per housing) SKU: Z1-LOCDROP-SM Unit of Measurement : EA$20.83 -
![FIS Fiber Drop Cable Repair Kit]()
FIS Fiber Drop Cable Repair Kit, Duplex with SC/APC to SC/APC SKU: Z1-LOCDROP-2SCAPC Unit of Measurement : EA$163.34 -
![FIS NID Box, 1 SC/APC Adapter, Cable Retention and Management]()
FIS NID Box, 1 SC/APC Adapter, Cable Retention and Management SKU: Z1NDYACR-UU Unit of Measurement : EA$37.95 -
![PLP Coyote GLC Height Capacity Kit w/Base]()
-
![PLP Coyote GLC with Universal Organizer (Buffer and Ribbon)]()
PLP Coyote GLC with Universal Organizer (Buffer and Ribbon) SKU: COYGLCF1B000 Unit of Measurement : EA$440.95 -
![PLP Coyote GLC Cross Connect Kit w/Base]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
