-
Corning® Cable Systems ST Connector Multimode UniCam 50 125um Zirconia SKU: 9505051 Unit of Measurement : EA$17.45 -
Corning® Cable Systems LC Connector Multimode UniCam 62.5 125um Zirconia SKU: 9500099 Unit of Measurement : EA$15.95 -
Corning® Connector Boot Clip LC 2.0mm 90 Degree Clear SKU: 9540004BPC Unit of Measurement : EA$1.40 -
Corning® Connector Boot Clip ST/FC/SC 3.0mm 90 Degree Clear SKU: 9540002BP Unit of Measurement : EA$2.50 -
![Corning® Cable Systems UniCam Connector Install Tool]()
Corning® Cable Systems UniCam Connector Install Tool, Universal SKU: TLUC01 Unit of Measurement : EA$641.50 -
![Corning® 2.5 Ferrule Adapter for Unicam Pretium Install. Tool]()
Corning® 2.5 Ferrule Adapter for Unicam Pretium Install. Tool SKU: VFLA250 Unit of Measurement : EA$68.00 -
![Corning® SC Connector Multimode 62.5um]()
Corning® SC Connector Multimode 62.5um, 3mm-White Boot, Single Pack SKU: 9510048SP Unit of Measurement : EA$3.50 -
![Corning® FC Connector Multimode Heat Cure 3mm-White]()
-
![Corning® FC Connector Multimode Heat Cure 2mm-White]()
-
![Corning® ST Connector Multimode Heat Cure 3mm Black Boot]()
Corning® ST Connector Multimode Heat Cure 3mm Black Boot, Single Pack SKU: 9510044SP Unit of Measurement : EA$4.85 -
![Corning® ST Connector Multimode Heat Cure 2mm-Black, Single Pack]()
Corning® ST Connector Multimode Heat Cure 2mm-Black, Single Pack SKU: 9510044SP2 Unit of Measurement : EA$4.85 -
![Corning® SC Connector Multimode 62.5um Heat Cure 1.6-2mm-White Boot]()
Corning® SC Connector Multimode 62.5um Heat Cure 1.6-2mm-White Boot SKU: 9510048SP2 Unit of Measurement : EA$3.50
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
