-
-
-
-
FIS Connector Cleaner Bulkhead Ferrule for 2.5mm Connectors Gray Tip (525+ Cleans) SKU: F16715 Unit of Measurement : EA$49.50 Qty Buy as low as $47.03 -
![FIS Connector Cleaner Bulkhead Ferrule for 1.25mm Connectors Blue Tip (525+ Cleans)]()
FIS Connector Cleaner Bulkhead Ferrule for 1.25mm Connectors Blue Tip (525+ Cleans) SKU: F16716 Unit of Measurement : EA$49.50 Qty Buy as low as $47.03 -
![FIS FiberSwipe 500 End Face Connector Cleaner]()
FIS FiberSwipe 500 End Face Connector Cleaner SKU: F16712 Unit of Measurement : EA$56.95 Qty Buy as low as $54.10 -
![FIS Connector Cleaner Yellow without Retractable Cover (F17111)]()
FIS Connector Cleaner Yellow without Retractable Cover (F17111) SKU: F17111 Unit of Measurement : EA$18.00 Qty Buy as low as $17.10 -
![FIS Universal Connector Cleaner-20 Feet]()
FIS Connector Cleaner Universal 20 Feet (F17020C) SKU: F17020C Unit of Measurement : EA$13.95 Qty Buy as low as $13.25 -
![FIS Isopropyl Alcohol 99% Squeeze Bottle 4 oz. Case of 6]()
FIS Isopropyl Alcohol 99% Squeeze Bottle 4 oz. Case of 6 SKU: F10007 Unit of Measurement : Case$18.95 Qty Buy as low as $18.00 -
![FIS Cleaning Solution 99% Isopropyl Alcohol 4 Gallons Per Case]()
FIS Cleaning Solution 99% Isopropyl Alcohol 4 Gallons Per Case SKU: F11007GA Unit of Measurement : Case$170.00 Qty Buy as low as $161.50 -
![FIS Cleaning Solution 99% Isopropyl Alcohol Spray Bottle 4 oz.]()
FIS Cleaning Solution 99% Isopropyl Alcohol Spray Bottle 4 oz. SKU: F10007SP Unit of Measurement : EA$4.85 Qty Buy as low as $4.61 -
![FIS Cleaning Solution 99% Isopropyl Alcohol Case of 6]()
FIS Cleaning Solution 99% Isopropyl Alcohol Case of 6 SKU: F10068 Unit of Measurement : 6pack$42.95 Qty Buy as low as $40.80
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
