-
3mm Cordage Holder for Lightera Splicers; SLA Version S153/123 SKU: F1SLA30FTLHLDR Unit of Measurement : EA$100.00 -
FIS Fusion Splicer Kit CA6+ Core Alignment with FC-6R+ Cleaver SKU: F1CA6P Unit of Measurement : EA$7,840.00 -
FIS 900um Cheetah SOC Loosetube Holder for AFL Splicers SKU: F1SOC900LB-A Unit of Measurement : EA$115.00 -
FIS 900um Cheetah SOC Loosetube Holder for the FIS AC5 Fusion Splicer SKU: F1SOC900LB-AC5 Unit of Measurement : EA$115.00 -
![FIS 900um Cheetah SOC Loosetube Holder for the FIS CA6 Fusion Splicer]()
FIS 900um Cheetah SOC Loosetube Holder for the FIS CA6 Fusion Splicer SKU: F1SOC900LB-CA6 Unit of Measurement : EA$115.00 -
![FIS 900um Cheetah SOC Loosetube Holder for the Lightera Splicers - Ninja]()
FIS 900um Cheetah SOC Loosetube Holder for the Lightera Splicers - Ninja, S154, S179 SKU: F1SOC900LB-F2 Unit of Measurement : EA$115.00 -
![AFL ARM-CT16-01 Replacement Fiber Clamp Pads]()
-
![AFL CLAMP-S35B Loose Buffer Sheath Clamp (45S)]()
-
![AFL ADC-21 AC Adapter (FSR-11X, CT-11X & 35S/45S)]()
-
![AFL Fusion Splicer Set Plates for 45S, SP-04]()
-
![AFL Cleaver Carrying Case CC-46 for CT-16]()
-
![Sumitomo Ribbon Fusion Splicer Kit Q102M12+Quantum]()
Sumitomo Ribbon Fusion Splicer Kit Q102M12+Quantum SKU: TYPEQ102M12PKIT6RP1 Unit of Measurement : EA$17,121.50
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
