-
-
Sumitomo Q102LITE-CORE Fusion Splicer Kit with FC-8R Cleaver and Fiber Holders SKU: Q102LITECOREKIT8RFH Unit of Measurement : EA$8,819.75 -
-
3mm Cordage Holder for AFL Splicer; SLA Version SKU: F1SOC30AFLSLAHLDR Unit of Measurement : EA$100.00 -
![Lightera 500um Fiber Holders]()
-
![Lightera Fusion Splicer Fiber Holders 900um]()
-
![Sumitomo Type-Q502S Quantum Smart Active Clad Alignment Fusion Splicer Kit]()
Sumitomo Type-Q502S Quantum Smart Active Clad Alignment Fusion Splicer Kit, No Cleaver SKU: TYPEQ502SKIT1H Unit of Measurement : EA$3,587.35 -
![Lightera 160um Fiber Holders (Pair)]()
-
![Lightera 10mm Cleave Length Tight Holder]()
-
![Sumitomo Splicer Q102M12 Kit w/ FC−6R+ & JR−6+ Quantum Splic]()
Sumitomo Splicer Q102M12 Kit w/ FC−6R+ & JR−6+ Quantum Splic SKU: TYPEQ102M12KIT6RM1P Unit of Measurement : EA$14,969.55 -
![Lightera 16mm Fiber Clamps]()
-
![AFL Fiber Arrangement Tool for Fusion Splicing FAT-04 Ribbonizer]()
AFL Fiber Arrangement Tool for Fusion Splicing FAT-04 Ribbonizer SKU: S010212 Unit of Measurement : EA$528.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
