FIS Cable Jetter Kit
Key Features
- Quick connect the system to attach to 3/8¢‚¬ I.D. conduit
- Air hookup with air shutoff valve
- Nylon line spool holder
- Mechanical drive to push fiber through the conduit when needed
- Portable DEWALT 6-gallon 165 PSI pancake compressor & Air Hose option is available‚ (2.6 scfm @ 90 PSI)
- Larger compressors can be used but a max of 80 PSI is advised
Fiber Jetter Kit Contents
- Cable Jetter with nylon‚ line
- Threaded Nozzle
- Quick Connect(2)
- Blowing Projectile(6)
- Pre-cut Nylon Pull String
- Mini Pulling Eye(6)
Microduct is an excellent way to physically protect fiber cable. Microduct also allows for the cable to be installed by air forcing or mechanically pushing the cable using the Cable Jetting equipment. The FIS Cable Jetter is a complete kit enabling the user to air blow and mechanically push up to 3mm diameter fiber optic cable, to install a 60-pound nylon line as a pull string, or also as an aid to install mule tape. Installation of cables up to 250¢‚¬ long can be easily achieved. The ability to mechanically push the cable helps move the cable past bends in the conduit. Longer distances can be achieved with the nylon pull string line option. As an additional option, the portable 90 PSI compressor can be purchased in addition to the basic kit, or you can use your air source; it is not recommended to exceed 80 PSI.
