Loctite Adhesive Anaerobic Hardener

Must be shipped ground. This is a two-part Fiber Optic Anaerobic Adhesive system that self cures in minutes with no heat required. To use, you inject the retaining compound into the connector with a syringe needle. Next, dip or spray the optical fiber with primer and connectorize as usual. You will find that this Fiber Optic Anaerobic Adhesive sets up in seconds, and is fully cured in minutes. This adhesive is available for domestic ground shipment only! See Anaerobic Fiber Optic Connectors available from FIS.

Note: FIS does not recommend the use of anaerobic adhesive unless this type of adhesive is specified by the fiber optic connector manufacturer. FIS is not liable for product or labor loss, and will not accept returns on this item. Shipping restrictions and fees may apply.