-
-
Signamax Keystone Faceplate 6 Port Single Gang with Labeling Windows SKU: SKFL6 Unit of Measurement : EA$1.25 -
Signamax Modular Plug AESP-RJ-45 Category 5 8P/8C Plug 24 AWG Solid Cable 100pk SKU: KRJ45/5SLD-100 Unit of Measurement : 100$24.00 -
-
![FIS Media Converter ST Singlemode 10/100 Base-T/TX to 100 Base-FX Media Converter 20km]()
FIS Media Converter ST Singlemode 10/100 Base-T/TX to 100 Base-FX Media Converter 20km SKU: F1DU1001320ST Unit of Measurement : EA$60.00 -
![SIGNAMAX Copper Patch Panel 48-Port Category 6A Unscreened]()
SIGNAMAX Copper Patch Panel 48-Port Category 6A Unscreened SKU: 48458C6A Unit of Measurement : EA$363.85 -
![FIS Copper Cat5E Patchcord with boots]()
-
![Fluke Pro3000 Tone & Probe Kit]()
-
![Signamax Keystone Faceplate 4 Port Single Gang with Labeling Windows]()
Signamax Keystone Faceplate 4 Port Single Gang with Labeling Windows SKU: SKFL4 Unit of Measurement : EA$1.25 -
![Signamax Modular Plug AESP-RJ-45 Category 5 8P/8C Plug 24 AWG Stranded Cable 100pk]()
Signamax Modular Plug AESP-RJ-45 Category 5 8P/8C Plug 24 AWG Stranded Cable 100pk SKU: KRJ45/5-100 Unit of Measurement : 100$24.25 -
![FIS Media Switch 10/100Mbps 802.3af PoE 8-Port 20km + 1 Port Fiber 10/100Mbps Fiber is 1310nmT/1550nmR]()
FIS Media Switch 10/100Mbps 802.3af PoE 8-Port 20km + 1 Port Fiber 10/100Mbps Fiber is 1310nmT/1550nmR SKU: F1PSE1009F3520 Unit of Measurement : EA$150.00 -
![FIS Media Converter SC Singlemode 10/100 Base-T/TX to 100 Base-FX 20km]()
FIS Media Converter SC Singlemode 10/100 Base-T/TX to 100 Base-FX 20km SKU: F1DU1001320SC Unit of Measurement : EA$60.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
