-
FIS Wall Mount Enclosure 8 Panel Deluxe Loaded with 8 Duplex LC OM3 Plates & Splice Trays Black SKU: F1DW8XLCOM396 Unit of Measurement : EA$300.00 -
FIS Adapter Plate 6-Pack SC Duplex Singlemode APC Green Adapters Loaded (12 Fibers) Black SKU: F1SC6DBKAPCUL Unit of Measurement : EA$24.75 -
FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex SC/UPC Plates Pigtails & Splice Trays Black SKU: F1RM4RU12XSCUPC144SP Unit of Measurement : EA$733.84 -
FIS Wall Mount Enclosure 8 Panel Deluxe Loaded with 8 Duplex SC/UPC Plates Pigtails & Splice Trays Black SKU: F1DW8XSCUPC96SP Unit of Measurement : EA$645.00 -
![FIS Adapter Plate Blank Plate with No Holes Unloaded Black]()
FIS Adapter Plate Blank Plate with No Holes Unloaded Black SKU: F1BLANKUBK Unit of Measurement : EA$4.50 -
![FIS Wall Mount Enclosure 8 Panel Deluxe Loaded with 8 Duplex SC OM3 Plates Pigtails & Splice Trays Black]()
FIS Wall Mount Enclosure 8 Panel Deluxe Loaded with 8 Duplex SC OM3 Plates Pigtails & Splice Trays Black SKU: F1DW8XSCOM396SP Unit of Measurement : EA$565.00 -
![FIS Adapter Plate 6-Pack ST Singlemode Loaded Black]()
-
![FIS Adapter Plate 6-Pack ST Multimode Loaded Black]()
-
![FIS Rack Mount Enclosure 4RU Loaded w/ 12 Duplex LC/APC Plates & Splice Trays Black]()
FIS Rack Mount Enclosure 4RU Loaded w/ 12 Duplex LC/APC Plates & Splice Trays Black SKU: F1RM4RU12XLCAPC144 Unit of Measurement : EA$455.00 -
![FIS Adapter Plate 8-Pack ST Multimode Loaded Black]()
-
![FIS Adapter Plate 8-Pack ST Singlemode Loaded Black]()
-
![FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex LC/UPC Plates Pigtails & Splice Trays Black]()
FIS Rack Mount Enclosure 4RU Loaded with 12 Duplex LC/UPC Plates Pigtails & Splice Trays Black SKU: F1RM4RU12XLCUPC144SP Unit of Measurement : EA$695.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
