-
FIS LC Adapter Duplex Beige Multimode - with Flange, Style 3, SC Footprint SKU: F18030 Unit of Measurement : EA$3.25 Qty Buy as low as $3.02 -
FIS SC APC Adapter Duplex Green Singlemode - with Flange, Style 3 SKU: F18701 Unit of Measurement : EA$3.75 Qty Buy as low as $3.49 -
FIS Dust Cap Mating Sleeve Adapter FC with Warning Label Aqua Round Head - 100 Pack SKU: F1ADCAPFCSAQ Unit of Measurement : EA$75.00 -
-
![FIS Cleaning Swabs Debris Removal with Adhesive 5-Pack]()
-
![FIS Splice Tray 12 Position Mechanical Splice (7.5"L x 4.0"W x .63"H)]()
FIS Splice Tray 12 Position Mechanical Splice (7.5"L x 4.0"W x .63"H) SKU: F16707BLKM Unit of Measurement : EA$14.95 Qty Buy as low as $13.46 -
![FIS Adapter Plate 6-Pack SC Singlemode APC Green Adapters Loaded Black]()
FIS Adapter Plate 6-Pack SC Singlemode APC Green Adapters Loaded Black SKU: F1SC6IBKAPCUL Unit of Measurement : EA$22.75 -
![FIS Space Saver Fiber Splice Tent Green 8' x 8' x 7'8"]()
FIS Space Saver Fiber Splice Tent Green 8' x 8' x 7'8" SKU: F197978GS Unit of Measurement : EA$1,300.00 -
![FIS Copper Cat 5e Patch Cable with Boots 5ft Black]()
-
![FIS Wall Mount Patch Panel Deluxe Holds (4) Adapter Plates Unloaded Black]()
FIS Wall Mount Patch Panel Deluxe Holds (4) Adapter Plates Unloaded Black SKU: F1DW4X Unit of Measurement : EA$130.00 Qty Buy as low as $117.00 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, LC to SC APC-UPC, 3 meters, 1.6mm, Duplex, SM | Plus Corning® SMF-28® Ultra Fiber SKU: X9LAYUS3FISCU Unit of Measurement : EA$8.95 Qty Buy as low as $8.06 -
![FIS LC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 10dB]()
FIS LC Attenuator Male to Female Singlemode 1310/1550 APC Attenuator 10dB SKU: F18771A10 Unit of Measurement : EA$13.95 Qty Buy as low as $12.56
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
