-
-
FIS WRAP-N-ROUTE - 75 Foot Roll, ¾ Inch Wide, with Center Core - Black SKU: F1WR75 Unit of Measurement : EA$30.95 -
FIS High Power Hand Held VFL - Visual Fault Locator <5mW SKU: F1VFLH Unit of Measurement : EA$149.00 -
FIS Fiber Optic Patch Cable, SC PC to SC PC, 5 meters, 1.6mm Simplex MM | Plus Corning® ClearCurve® OM3 Multimode Fiber SKU: Y8YYM5FISC Unit of Measurement : EA$5.05 Qty Buy as low as $4.55 -
![FIS Fiber Optic Patch Cable]()
FIS Fiber Optic Patch Cable, SC PC to LC PC, 3 meters, 1.6mm Simplex, Multimode | Plus Corning® InfiniCor®300 Fiber SKU: Y2YLM3FISC Unit of Measurement : EA$4.35 Qty Buy as low as $3.92 -
![FIS Mode Conditioning Fiber Optic Patch Cable]()
FIS Mode Conditioning Fiber Optic Patch Cable, 62.5/125 SC-ST, 5 Meters SKU: F1MCP52SCST Unit of Measurement : EA$73.00 -
![FIS ST/UPC SM 9/125um Terminator Connector]()
FIS ST/UPC SM 9/125um Terminator Connector, Back Reflection -55dB SKU: F10071 Unit of Measurement : EA$6.95 -
![FIS 900um Pigtail]()
FIS 900um Pigtail, 6 Fiber, Singlemode, SC/UPC, Blue Boots, 3 Meters SKU: SP6SCUPCBU Unit of Measurement : EA$14.25 -
![FIS Distribution Pigtail]()
FIS Distribution Pigtail, 6 Fiber, Singlemode, SC/APC, Green Boots, 3 Meters SKU: DSP6SCAPCGR Unit of Measurement : EA$15.50 -
![FIS LYNX Fiber Optic Cleaver w/Lighted Work Station]()
-
![FIS Lab Splice Blister Pack of 12 ( 2 of each color )]()
FIS Lab Splice Blister Pack of 12 ( 2 of each color ) SKU: FIS114012 Unit of Measurement : 12PK$23.95 -
![FIS Fusion Splice Protection Slim Sleeve 60mm]()
FIS Fusion Splice Protection Slim Sleeve 60mm, 2.5mm After Shrink, 50 Pack SKU: F1S25C-50 Unit of Measurement : 50PK$11.95 Qty Buy as low as $10.76
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
