-
FIS Flush Mount Rack Adapter Brackets 2RU 23" Black (Pair) SKU: 2RURACKADP23FLUSH Unit of Measurement : EA$19.95 -
-
FIS Swing Out Enclosure 2RU Flush Mount Left Side Cable Manager and Rear Exit Cable Return Unloaded Black SKU: F1RMRX2RU4X Unit of Measurement : EA$130.00 Qty Buy as low as $117.00 -
FIS Distribution Pigtail, 12 Fiber, Singlemode, LC/APC, Green Boots, 3 Meters SKU: DSP12LCAPCGR Unit of Measurement : EA$31.50 -
![FIS FIBER FENCE Simplex Bend Sensitive Fiber]()
-
![FIS Economy Grade Duct Tape 2" W x 60 Yd Long Silver]()
-
![FIS Optical Splitter Module PLC LC/APC Connector Adapters 1x16 1RU Short LGX Package]()
FIS Optical Splitter Module PLC LC/APC Connector Adapters 1x16 1RU Short LGX Package SKU: Z1PLM1161SLLA Unit of Measurement : EA$240.00 Qty Buy as low as $204.00 -
![FIS Flat Drop Cable Assembly]()
FIS Flat Drop Cable Assembly, Singlemode, Toneable, 1 ZTAP Connector, Pigtail 350 feet | Plus Corning® SMF-28® Ultra Fiber SKU: ZDCT-1-HIP-P-350 Unit of Measurement : EA$85.88 -
![FIS Optical Splitter LC/APC Connectors 1x16 OSP Package 1.5mm Long 2mm Jacketed Leads]()
FIS Optical Splitter LC/APC Connectors 1x16 OSP Package 1.5mm Long 2mm Jacketed Leads SKU: Z1PLCM116OSP20A2LA1.5 Unit of Measurement : EA$138.00 Qty Buy as low as $124.20 -
![FIS MDU Drop Cable]()
FIS MDU Drop Cable, Singlemode, Pathfinder SC/APC - SC/APC with Mini Pulling Eye Kit, Polyethylene Black, 25 feet (Hand Spooled) | Plus Corning® ClearCurve® LBL Fiber SKU: ZMDUL-1-YA-YA-25-MPE-HS Unit of Measurement : EA$28.95 -
![FIS Optical Splitter Module PLC 1x8 1.6mm Jacketed 2 Meter Leads with with SC/APC Connectors ½ LGX (0.875"H) Footprint]()
FIS Optical Splitter Module PLC 1x8 1.6mm Jacketed 2 Meter Leads with with SC/APC Connectors ½ LGX (0.875"H) Footprint SKU: Z108LGXSCA2HD Unit of Measurement : EA$187.50 -
![FIS 8 Channel 1471-1611nm CWDM Analyzer (COSA)]()
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
