-
-
Anritsu Fiber Launch Kit, Singlemode, 100 meters, with Armored Leads, SC/APC LC/UPC, Includes LC/UPC Adapter SKU: FMTL4 Unit of Measurement : EA$120.00 -
FIS Compact 400x Microscope with 2.5mm and 1.25mm Adapters SKU: F1MS400U Unit of Measurement : EA$150.00 -
-
![EXFO MAX720D Dedicated Handheld OTDR 1310/1550nm VFL PM RF]()
EXFO MAX720D Dedicated Handheld OTDR 1310/1550nm VFL PM RF SKU: MAX720DSM1OTDREAEUI91VPM2XFOA54BRFGP10061 Unit of Measurement : EA$7,760.00 -
![Anritsu Portable Antenna]()
Anritsu Portable Antenna, 2.4 to 2.5 GHz, SMA Male, 50 OHM, for Anritsu Wireless Test Equipment SKU: 20001032 Unit of Measurement : EA$45.00 -
![Wilcom Optical Fiber Identifier Ribbon]()
-
![FIS Universal Test Adapter ST to 2.5mm]()
FIS Universal Test Adapter ST to 2.5mm SKU: F181UNIV Unit of Measurement : EA$25.00 Qty Buy as low as $20.00 -
![FIS Visual Fault Locator Dual Source LC Duplex Singlemode / Multimode]()
FIS Visual Fault Locator Dual Source LC Duplex Singlemode / Multimode SKU: F1DXVFL Unit of Measurement : EA$295.00 Qty Buy as low as $265.50 -
![FIS Launch Box Style #7 SM SC/APC - SC/APC 500 meters]()
FIS Launch Box Style #7 SM SC/APC - SC/APC 500 meters SKU: PS73500PYAYA Unit of Measurement : EA$260.00 -
![FIS USB inspection probe for Mini-OTDR includes (8) APC & UP]()
FIS USB inspection probe for Mini-OTDR includes (8) APC & UP SKU: FCVMP Unit of Measurement : EA$1,095.00 -
![EXFO MAX730D Dedicated Handheld OTDR 1310/1550 Filter.1650]()
EXFO MAX730D Dedicated Handheld OTDR 1310/1550 Filter.1650 SKU: MAX730DSM8OTDREAEUI91VPM2XFOA54BGP10061 Unit of Measurement : EA$11,695.00
Splicing
Fusion Splicing is a preferred way to join two fibers together by using heat. Whether the fiber was broken or not long enough, a fusion splicer will make your job easier. Splicing fiber optic cable is fairly simple procedure. Prepared fiber ends are placed in the splicer and automatically aligned and then fused together. This method ensures greater reliability with less light being scattered or reflected back by the splice. The splice itself if done correctly should be as strong as the original optical fiber.
